Raycus 20W Fiber Laser Marking Machine For Engravable Metal Materials

Raycus 20w metal fiber laser marking machine for steel aluminium RF-20

1. How to find a good quality laser marking machine ?

For fixed marking graphics, the factors affecting marking efficiency can be divided into equipment itself and processing materials.

Therefore, the factors that ultimately affect the marking efficiency are filling type, mirror (filling line spacing), galvanometer (scanning speed), laser source,materials and so on.

2. The way to increase marking efficiency

Choose the suitable filling type

--- Arch filling: marking efficiency is the highest, sometimes there will be connection lines, uneven problems. When marking fine graphics and fonts, these problems will not occur, so bow filling is the first choice.

--- Two-way filling: Marking efficiency is second, the effect is good.

--- One-way filling: marking efficiency is the slowest, rarely used in actual processing.

--- Circle filling: It is only used for fine-marked graphics and fonts, and its efficiency is similar to that of bow-shaped padding.

--- Note: The use of bow filling can improve marking efficiency without requiring detailed effects. Two-way filling is the best choice to ensure the effect and efficiency.

Choosing the right mirror

--- The more bigger focus mirror, the more bigger focus spot. the distance between filling lines can be increased then improving the marking efficiency.

--- Note: The bigger the mirror is, the smaller the power density is. Therefore, the spacing of filling lines should be increased to ensure enough marking energy.

Choosing a high-speed galvanometer

Ordinary galvanometer, the maximum scanning speed can only reach two to three thousand millimeters per second; high-speed galvanometer, the maximum scanning speed can reach tens of thousands of millimeters per second. In addition, when using ordinary galvanometers to mark small graphics or fonts, it is easy to deform, and the effect must be guaranteed by reducing the scanning speed.

3. After reading above advise you still don't know how to make a right decision?

Next, I'll list the detailed configuration of different parts of the marking machine.

------ Laser is the main component of marking machine, occupying 60% of the importance of the whole marking machine.

Import: IPG, Coherent, SPI, NKT, nLight, Jenoptik, JDSU, EO

Domestic: Raycus,JPT,YIPIN etc

------ Scanning galvanometer is the second key component of marking machine: the selection of galvanometer directly affects the marking effect in the later period. Whether the distortion of graphics will occur temperature drift and marking speed directly depends on the selection of galvanometer. The high-speed scanning galvanometer can reach 12,000 mm/s and the low-speed scanning galvanometer can generally reach the maximum of 2000-4,000 mm/s.

------ Computer configuration is also very important: this shouldn't have to be explained.

Our laser marking machine can be divided into: desktop marking machine ,portable marking machine, co2 laser marking machine, fiber laser marking machine etc

4. Now please check our machine detail specifications

5. Rhino fiber laser marking machine application area

• Electronic components, electrical appliances, electronic communications, motorcycle accessories, precision hardware, etc.
• Gift jewelry, medical equipment, glasses, clocks, instruments and sanitary ware and other industries.
• Engravable metal materials and some non-metallic materials, especially suitable for some more sophisticated requirements.
• Areas with higher accuracy and higher requirements for smoothness;
• Widely used in electronic separation components, integrated circuits (IC), electrical circuits, etc.
• Mobile communications, hardware products, tools and kitchen utensils, tool accessories, precision instruments;
• Applicable to glasses, clocks, computer keyboards, jewelry, automotive accessories, plastic buttons,
• Plumbing accessories, sanitary wares, PVC pipes, medical devices, packaging bottles and cans, etc.

6. Machine detail photo and marking samples

• Lifetime maintenance free of charge.
• Free training course at our plant.
• 24 hours on line service each day, free technical support.
• Machine has been adjusted before delivery